| Titre : |
Essentials of Industrial Pharmacy |
| Type de document : |
texte imprimé |
| Auteurs : |
Khan Saeed Ahmad, Auteur |
| Editeur : |
Springer Nature Switzerland AG |
| Année de publication : |
2022 |
| Collection : |
AAPS |
| Importance : |
298p. |
| Présentation : |
: ill en couleurs |
| Format : |
24x16cm. |
| ISBN/ISSN/EAN : |
978-3-030-84976-4 |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Industrial Pharmacy |
| Index. décimale : |
615.4-12.1 |
| Résumé : |
Table of
Contents1 Drying1.1 Introduction1.2 Important Terms used in Drying Process1.
3 The Drying Curve1.4 End Point Detection in Drying Process1.5 Selection of
Industrial Dryers1.6 Classification of Dryers1.6.1 Classification on the
basis of mode of energy input1.6.2 Classification on the basis of solid
handling1.7
Reference2 Mixing2.1 Introduction2.2 Mixer Selection 2.3 Mixing of liquids2.
3.1 Batch type liquid mixing2.4 Mixing of Solids and Semisolids2.4.1
Principle of Solid Mixing2.4.2 Degree of Mixing2.4.3 Segregation of Powder
(Demixing)2.4.4 Mechanism of Solid Mixing 2.4.5 Factors affecting solid
mixing2.4.6 Equipments for Solid Mixing 2.4.7 Equipments for Mixing of Semi
Solids2.6
References3 Comminution3.1 Introduction 3.2 Importance of Particle Size 3.3
Mechanism of Size Reduction 3.4 Factors Affecting Size Reduction3.5 Particle
Size Distribution 3.6 Particle Size Analysis3.6.1 Microscopy3.6.2 Sieving 3.
6.3 Sedimentation 3.6.4 Conductivity Method 3.7 Size Reduction of Powder 3.7.
1 Cutter mill 3.7.2 Hammer mill 3.7.3 Ball mill 3.7.4 Oscillating
granulator3.7.5 Fluid Energy Mill3.7.6 Fitz mill 3.8 Size Reduction of
Pharmaceutical Dispersions3.8.1 Agitators 3.8.2 Mechanical Mixers 3.8.4
Homogenizers3.8.5 Ultrasonic Devices3.9 Size Reduction in Semisolids3.9.1
Agitators3.9.2 Triple Roller mill3.9.3 Vacuum Emulsifying Mixers3.10
References4 Filtration 4.1 Introduction 4.2 Factors Affecting Rate of
Filtration 4.3 Mechanism of Filtration4.3 Filter Media 4.4 Filter Aid 4.5
Filtration Devices 4.5.1 Filter Leaf Assembly 4.5.2 Filter Press 4.5.3 Disc
Filter Assembly 4.5.4 Rotary Drum Filter Assembly4.5.5 Bag Filter Assembly 4.
5.6 Cartridge Filter Assembly 4.6
References5 Pharmaceutical Packaging 5.1 Introduction5.2 Properties of
Pharmaceutical Packaging5.3 Types of Packages 5.3.1 Primary Package 5.3.2
Secondary Package 5.3.3 Tertiary Package 5.4 Common Material for
Pharmaceuticals Packaging 5.4.1 Metal 5.4.2 Glass 5.4.3 Plastic5.5 Common
Packaging Techniques5.5
References6 Oral Emulsion 6.1 Introduction 6.2 Types of Emulsions 6.3 Theory
of Emulsification 6.4. Formulation Considerations of Emulsions6.4.1 Emulsion
Type 6.4.2 Volume of the Internal Phase6.4.3 Droplet Size 6.4.4 Viscosity6.4.
5 Preservation 6.4.6 Type and Concentration of Emulsifying Agents6.5
Emulsion Instability6.5.1 Cracking 6.5.2 Creaming and Sedimentation6.5.3
Phase Inversion6.6 Excipients Used in Emulsion 6.7 Industrial Manufacturing
of Emulsions 6.8
References7 Oral Suspensions7.1 Introduction 7.2 Dispersed Particles in a
Medium 7.3 Formulation Considerations 7.3.1 Chemical Incompatibility 7.3.2
Particle size 7.3.3 Viscosity 7.3.4 Wetting 7.3.5 Mixing 7.3.6 Size
reduction and Homogenization 7.3.7 Flocculation 7.3.8
PreservationDr. Saeed Ahmad Khan is an Associate Professor at the Department
of Pharmacy, Kohat University of Science and Technology, Pakistan and
previously a lecturer at the Sarhad University of Science and Information
Technology, Pakistan. Dr. Saeed Khan graduated in Pharmacy from University
of Peshawar, Pakistan. He subsequently joined Abbott Laboratories (Pakistan)
Limited, where he worked in solid and liquid dosage form manufacturing
sections. He was a supervisor at Parke-Davis & Co. Ltd., Karachi Pakistan,
for pharmaceutical production and quality management. He earned his M.S. in
Chemical Engineering from Daegu University, South Korea and obtained a DAAD
scholarship to pursue a Ph.D. at the Department of Pharmaceutical Technology,
under the supervision of Prof. Dr. Marc Schneider, at Philipps University
Marburg, Germany, where he excelled.
He was awarded the prestigious FULBRIGHT fellowship for a one-year postdoc
training under the supervision of Professor Robert O. Williams (Johnson &
Johnson Centennial Chair in Pharmacy, Editor-in-Chief, AAPS PharmSciTech and
Division Head) at Department of Molecular Pharmaceutics and Drug Delivery,
University of Texas at Austin, USA. . He has published many peer reviewed
articles in well reputed journals, has a patent and has presented sessions
at international conferences.
|
| Note de contenu : |
index;figures |
Essentials of Industrial Pharmacy [texte imprimé] / Khan Saeed Ahmad, Auteur . - [S.l.] : Springer Nature Switzerland AG, 2022 . - 298p. : : ill en couleurs ; 24x16cm.. - ( AAPS) . ISBN : 978-3-030-84976-4 Langues : Anglais ( eng)
| Mots-clés : |
Industrial Pharmacy |
| Index. décimale : |
615.4-12.1 |
| Résumé : |
Table of
Contents1 Drying1.1 Introduction1.2 Important Terms used in Drying Process1.
3 The Drying Curve1.4 End Point Detection in Drying Process1.5 Selection of
Industrial Dryers1.6 Classification of Dryers1.6.1 Classification on the
basis of mode of energy input1.6.2 Classification on the basis of solid
handling1.7
Reference2 Mixing2.1 Introduction2.2 Mixer Selection 2.3 Mixing of liquids2.
3.1 Batch type liquid mixing2.4 Mixing of Solids and Semisolids2.4.1
Principle of Solid Mixing2.4.2 Degree of Mixing2.4.3 Segregation of Powder
(Demixing)2.4.4 Mechanism of Solid Mixing 2.4.5 Factors affecting solid
mixing2.4.6 Equipments for Solid Mixing 2.4.7 Equipments for Mixing of Semi
Solids2.6
References3 Comminution3.1 Introduction 3.2 Importance of Particle Size 3.3
Mechanism of Size Reduction 3.4 Factors Affecting Size Reduction3.5 Particle
Size Distribution 3.6 Particle Size Analysis3.6.1 Microscopy3.6.2 Sieving 3.
6.3 Sedimentation 3.6.4 Conductivity Method 3.7 Size Reduction of Powder 3.7.
1 Cutter mill 3.7.2 Hammer mill 3.7.3 Ball mill 3.7.4 Oscillating
granulator3.7.5 Fluid Energy Mill3.7.6 Fitz mill 3.8 Size Reduction of
Pharmaceutical Dispersions3.8.1 Agitators 3.8.2 Mechanical Mixers 3.8.4
Homogenizers3.8.5 Ultrasonic Devices3.9 Size Reduction in Semisolids3.9.1
Agitators3.9.2 Triple Roller mill3.9.3 Vacuum Emulsifying Mixers3.10
References4 Filtration 4.1 Introduction 4.2 Factors Affecting Rate of
Filtration 4.3 Mechanism of Filtration4.3 Filter Media 4.4 Filter Aid 4.5
Filtration Devices 4.5.1 Filter Leaf Assembly 4.5.2 Filter Press 4.5.3 Disc
Filter Assembly 4.5.4 Rotary Drum Filter Assembly4.5.5 Bag Filter Assembly 4.
5.6 Cartridge Filter Assembly 4.6
References5 Pharmaceutical Packaging 5.1 Introduction5.2 Properties of
Pharmaceutical Packaging5.3 Types of Packages 5.3.1 Primary Package 5.3.2
Secondary Package 5.3.3 Tertiary Package 5.4 Common Material for
Pharmaceuticals Packaging 5.4.1 Metal 5.4.2 Glass 5.4.3 Plastic5.5 Common
Packaging Techniques5.5
References6 Oral Emulsion 6.1 Introduction 6.2 Types of Emulsions 6.3 Theory
of Emulsification 6.4. Formulation Considerations of Emulsions6.4.1 Emulsion
Type 6.4.2 Volume of the Internal Phase6.4.3 Droplet Size 6.4.4 Viscosity6.4.
5 Preservation 6.4.6 Type and Concentration of Emulsifying Agents6.5
Emulsion Instability6.5.1 Cracking 6.5.2 Creaming and Sedimentation6.5.3
Phase Inversion6.6 Excipients Used in Emulsion 6.7 Industrial Manufacturing
of Emulsions 6.8
References7 Oral Suspensions7.1 Introduction 7.2 Dispersed Particles in a
Medium 7.3 Formulation Considerations 7.3.1 Chemical Incompatibility 7.3.2
Particle size 7.3.3 Viscosity 7.3.4 Wetting 7.3.5 Mixing 7.3.6 Size
reduction and Homogenization 7.3.7 Flocculation 7.3.8
PreservationDr. Saeed Ahmad Khan is an Associate Professor at the Department
of Pharmacy, Kohat University of Science and Technology, Pakistan and
previously a lecturer at the Sarhad University of Science and Information
Technology, Pakistan. Dr. Saeed Khan graduated in Pharmacy from University
of Peshawar, Pakistan. He subsequently joined Abbott Laboratories (Pakistan)
Limited, where he worked in solid and liquid dosage form manufacturing
sections. He was a supervisor at Parke-Davis & Co. Ltd., Karachi Pakistan,
for pharmaceutical production and quality management. He earned his M.S. in
Chemical Engineering from Daegu University, South Korea and obtained a DAAD
scholarship to pursue a Ph.D. at the Department of Pharmaceutical Technology,
under the supervision of Prof. Dr. Marc Schneider, at Philipps University
Marburg, Germany, where he excelled.
He was awarded the prestigious FULBRIGHT fellowship for a one-year postdoc
training under the supervision of Professor Robert O. Williams (Johnson &
Johnson Centennial Chair in Pharmacy, Editor-in-Chief, AAPS PharmSciTech and
Division Head) at Department of Molecular Pharmaceutics and Drug Delivery,
University of Texas at Austin, USA. . He has published many peer reviewed
articles in well reputed journals, has a patent and has presented sessions
at international conferences.
|
| Note de contenu : |
index;figures |
|  |
615 
